A non-proprietary, universal, outdoor housing that gives security installers flexibility to mount multiple proprietary access control devices either side-by-side or above-and-below each other. These are used often at pedestrian or vehicular access points in parking, access control or gated entry applications. This is one of many members in an entire family of well-made, steel housing boxes. There are a few (but important) criteria that make Pedestal CEO housings the best for professional installers:
Will the housing fit my access control devices? Yes.
Any Pedestal CEO housing can fit hundreds of combinations of devices such as card readers, intercoms, keypads, cameras, actuators, push buttons, control switches, and more. For your convenience, card reader housings are available in multiple portrait, landscape and square shapes and sizes. There are small housings to fit a single device (such as the 8x8”) and larger housings that fit multiple devices (such as the 24x24”)… as well as everything in between.
If you are cutting out parts of the door panel to accommodate flush mount devices, please take into account the door jams on the back left and right sides of the door panel. Generally, a .5” border should be undisturbed on the left, right, and bottom when cutting to preserve these door jams (which also contain weather seals.) All cutout areas are disclosed on the item’s PDF drawings. Custom widths are available. Ask for price and lead time.
This outdoor card reader enclosure has a 3.0” deep back box area. This is sufficient for most flush mount devices; however, if you are installing flush mount devices (such as 4" deep cameras) which require deeper back box areas then please ask for price and availability. Custom back box depths are available.
Will the housing provide the necessary security? Yes.
Pedestal CEO intercom housings are made from bent and welded 16-gauge sheet metal, not plastic– like some competing products. If you were a vandal, would you be more deterred from steel construction or plastic? Furthermore, each stock housing has a 3.5”D (top) and 1.75”D (bottom) tapered hood for hand privacy providing a 60° visual cone… eliminating 120° (60° from the left and 60° from the right) from the field-of-view of onlookers and potential code thieves. Custom hood depths [such as 6.0”D (top) and 4.75”D (bottom)] provide even greater security and are available upon request. Ask for price and lead time.
Will the housing survive Mother Nature? Yes.
First and foremost, the greatest eyesore over time is a rusty hinge. Pedestal CEO has eliminated this problem by fabricating all its exterior card reader housings with stainless steel hinges! Second, our wind face test modeling has determined these gooseneck pedestal boxes will survive sustained Category 5 hurricane winds of 157mph. Third, each push button housing is washed in a phosphate detergent solution (rust inhibitor) and powder coated at 400°F to fill the open pores in the hot steel with an outdoor, polyester TGIC, UV-protected powder coat finish. Once cooled, the baked-on powder provides a tough layer to prevent scratching, rusting, or fading in the sun.
Each card reader pedestal housing also contains a weather proof zinc-plated cam lock, weather tight door panel (sealed using 3/8” weather stripping between the door panel and door jams), and 3.5” deep weather canopy for protecting your access control devices from sun, rain and snow.
Is the housing easy to install? Yes.
This 6" housing doesn't contain the typical knockout pattern on the backside as the other larger housings have, but it does contains 4 knockouts for mounting on a wall or any pedestal. It also contained a centered 1.8” diameter hole for conduit access. The door panel is easily removable using 2 fasteners on the top of the door just underneath the hood. We supply standard fasteners-- you might replace these with security fasteners of your choice. The door panel is made from 16-gauge steel that can be cut and drilled for flush mount electronics. If you don’t care to perform your own cutouts, then Pedestal CEO offers these cutout services. Simply send us your hole pattern specifications and ask for price and lead time.
Is the housing affordable and readily-available? Yes.
Our pricing is very competitive and most everything you see online is stocked inventory. Since we have the largest selection of housings, our economies-of-scale help bring costs down for you. It has been noted that our steel solutions are even less expensive than plastic (lexan polycarbonate) products in the industry. And we usually ship within 24 hours of receiving your order. There is no order too large or too small. Pedestal CEO’s core competency is to care for security and access control professionals and we are better at providing these solutions than your local fabrication shop.
Are custom housings available? Yes.
We welcome custom projects. All models you see online are available in carbon steel (in stock), stainless steel (certain models in stock), and aluminum... and are also available in black wrinkle (in stock), brushed #4 stainless steel finish (certain models in stock), white, safety yellow, and electrical gray. Just about any color can be made available. Additional pricing and lead times may apply to a particular variation. Send us your ideas and ask for price and lead time. We have in-house design experts to help advise you on materials, processes, costs and lead times.
|Top Overhang||3.5", tapers to 1.75" at sidewall bottom|
|Back Box Area||3.00"D|
|Finish||Black Wrinkle TGIC Outdoor Polyester Powder Coat|
|Removable Door Panel||Yes|
|Does Not Include Cam Lock and Key||Requires 2 Security Fasteners (not included)|
|Includes Weather Stripping||Yes|
|Knockouts||qty 4, .25" diam|
|Center Hole||1.75" diam|
|Material Thickness||16 gauge|
|Box Size||9" x 9" x 7"|